Home / Computer / IT / How to Create the Bootable USB for Win 7 & Win 10

How to Create the Bootable USB for Win 7 & Win 10

How to Create the Bootable pen drive for Win 7 & Win 10

Warning: Follow the following algorithm and command carefully otherwise you will not be able to complete the task.

Step 1 of 2: Make your USB Bootable

  1. Press windows + R then type cmd on the onscreen computer
  2. Type diskpart
  3. “After then automatically open new dos command”
  4. DISKPART>list disk (Enter)
  5. “This command show the drive summary”
  6. DISKPART >select disk “USB”. Note: choose disk 0 or 1 as shown in command then (Enter)
  7. “Disk .. is now the selected disk”
  8. DISKPART >clean (Enter)
  9. “DiskPart succeeded in cleaning the disk”
  10. DISKPART >create partition primary (Enter)
  11. “DiskPart succeeded in creating the specified partition”
  12. DISKPART >select partition disk 0 (or 1) (Note: Select USB) (Enter)
  13. “Partition .. is now the selected partition”
  14. DISKPART >active (Enter)
  15. “Diskpart marked the currentt partition as active”
  16. DISKPART >format fs=ntfs quick (Enter)
  17.  “100% complete”
  18. “DiskPart successfully formatted volume
  19. DISKPART >exit (Enter)

After all, eject your USB and reboot your computer and to check whether you have completed the correctly or not insert USB and check. If task is done properly, you will see a sign of boot.

Step 2 of 2: Make your USB Un-Bootable

Repeat the same procedure of follow the follow the following algorithm carefully

Warning: Follow the following algorithm and command carefully otherwise you will not be able to complete the task.

  1. Open computer
  2. Press windows + R then type cmd
  3. Type diskpart
  4. “After then automatically open new dos command”
  5. DISKPART>list disk (Enter)
  6. “This command show the drive summary”
  7. DISKPART >select disk “USB”. Note: choose disk 0 or 1 as shown in command then (Enter)
  8. “Disk .. is now the selected disk”
  9. DISKPART >clean (Enter)
  10. “DiskPart succeeded in cleaning the disk”
  11. DISKPART >create partition primary (Enter)
  12. “DiskPart succeeded in creating the specified partition”
  13. DISKPART >select partition disk 0 (or 1) (Note: Select USB) (Enter)
  14. “Partition .. is now the selected partition”
  15. DISKPART >active (Enter)
  16. “Diskpart marked the currentt partition as active”
  17. DISKPART >format fs=ntfs quick (Enter)
  18.  “100% complete”
  19. “DiskPart successfully formatted volume
  20. DISKPART >exit (Enter)

Also Read:

Important messenger settings

About Arjun Dhamala

Arjun Dhamala is the CEO of thereadmore.com. He is the student of statistics and permanent resident of Nepal. He is one of the Author in this website. Writing, reading and travelling are his hobbies.

Check Also

unblock on facebook

2 Ways to Get Unblocked on Facebook

Keep in mind that there is no way to ensure that your account will be unblocked; these are just the steps you have to take to submit your account for review.

Leave a Reply

Your email address will not be published. Required fields are marked *